HPE G10/G11 DL380 NVME Cage 826689-B21

Page on the 826689-B21 8 bay NVME cage.

This is being thought to use this as a nice NVME U.2 Kit for expanding a normal server/desktop.

It doesn't appear to need anything other than 12v, as there's 6a regulator on the board and another for another lower amperage.

The other parts are really to drive the IO. 12v goes to the right pins on the NVME ports.

Dimensions

5.27" high x 3.245" wide. Should fit in a 5.25" full bay

Pin Out

Power
From the rear with the screws facing up topways, pin 1 is the lower right.
6 5 4
3 2 1

1 - +12v
2 - Ground
3 - has 5.1 v on it, connected to pin 3 and 5 on (+ input 1&2) on lm358, and 1k between gnd and this pin. 
4 - NC / not present on power cable
5 - Ground
6 - +12v

Docs

https://support.hpe.com/hpesc/public/docDisplay?docId=a00019682en_us&page=GUID-493DDE5C-0B08-444B-8986-BB871D884B21.html&docLocale=en_US

Parts list spreadsheet

Pictures

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•