First Generation PA

From W9CR
Revision as of 12:21, 15 November 2015 by Bryan (talk | contribs) (Created page with "The Quantar First Generation UHF Power Amps cover UHF R1, R2, R3 and R4. R0, 380-433 MHz, was a slight redesign, and it is covered else where. = Basics = The Basic module...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

The Quantar First Generation UHF Power Amps cover UHF R1, R2, R3 and R4. R0, 380-433 MHz, was a slight redesign, and it is covered else where.

Basics

The Basic module is pictured below

First Generation PA Layout

The complete schamtics are PNG format and are also avialbel as a PDF

Conversions

Converting from a R1 to R2 is quite easy