Difference between revisions of "Quantar"
| Line 12: | Line 12: | ||
Conventional Firmware for U1-U4 on the SIMM module | Conventional Firmware for U1-U4 on the SIMM module | ||
| − | [[Media:Quantar-Flash-Simm-EPIC2-NON-IR-FW-20.14.048-Boot-020.10.001.zip] | + | [[Media:Quantar-Flash-Simm-EPIC2-NON-IR-FW-20.14.048-Boot-020.10.001.zip]Conventional Firmware for U1-U4 on the SIMM module] |
==== Code Plug format ==== | ==== Code Plug format ==== | ||
Revision as of 16:07, 25 October 2015
Quantar/Quantro info
There is a bunch of info here about the technical aspects of the Quantar Stations
Programming
Links to programming stuff
Firmware
SIMM Images
Conventional Firmware for U1-U4 on the SIMM module [[Media:Quantar-Flash-Simm-EPIC2-NON-IR-FW-20.14.048-Boot-020.10.001.zip]Conventional Firmware for U1-U4 on the SIMM module]
Code Plug format
Manuals
Hardware info
Part numbers
Here are part numbers and what the correspond to
Station Control info
Station Control Module or SCM is the heart of the Quantar station. The SCM comes in different revisons known as EPIC.
- EPIC I
- EPIC II
- EPIC III
- EPIC IV - This is only for the Smart Zone trunking. IT will not work for conventional
- EPIC V
The only difference between the various versions of the EPICs (excluding EPIC IV) is the hardware is newer. There is no difference in functionality for conventional analog/astro/P25 operation.
Conversions
Work in progress on moving qunatar bands
UHF R0 to R2
This is doable
Exciter
Power AMP
Receiver
UHF R1 to R2
Converting the R1 (403-433) to R2 (438-470)
