Difference between revisions of "XTL Radio"

From W9CR
Jump to navigation Jump to search
Line 1: Line 1:
 +
[Category:XTL Radio]
 
Page covering the XTL 1500/2500/5000 Radios
 
Page covering the XTL 1500/2500/5000 Radios
  

Revision as of 23:46, 11 May 2020

[Category:XTL Radio] Page covering the XTL 1500/2500/5000 Radios

These are P25 trunking radios which are mono-band.

Accessory Connector

J2 is the accessory connector

Here's a picture of it from the radio side

Table of Pins

Sourcing of connector

As of now, there is no other source for the connector than Motorola.

The body looks like 2 D-Sub connectors stacked with standard pitch spacing on the pins.

Aftermarket Pins will not work due to the low profile retaining ring. This thread on the Batlabs Batboard has some more info and this picture showing the differences below:

XTS accessory Pin detail vs. normal pins

Photos of connector

I disassembled and took some close up pictures with my scope. The connector looks a bit similar to most D-SUB connectors.