Difference between revisions of "Wireline"
(Created page with "The Wireline Board = Boards = ==TTN5041A== ==TTN5061E== == CLN6651D== == CLN6955/CLN6957 == 4 Wire Board The CLN6957 is the International version and doesn't support co...") |
|||
| Line 1: | Line 1: | ||
| − | The Wireline | + | [[category:Quantar]] |
| + | [[category:ATAC]] | ||
| + | |||
| + | The Wireline Boards come in several different models, some at 8 wire with 4 audio ports and 2 v.24/modem ports and others are 4wire. The 8wire boards support more IO physically than the 4 wire, but other than that are not really interesting in Quantar service. | ||
| + | |||
| + | In ATAC service the 8wire boards are standard as they support 2 v.24 or analog channels per board. | ||
= Boards = | = Boards = | ||
| − | == | + | == Pre-Versions == |
| + | No idea about these parts. Analog only maybe? | ||
| − | == | + | ===TTN5041A=== |
| − | == | + | ===TTN5061E=== |
| − | == CLN6955/CLN6957 == | + | ==Version 1== |
| + | |||
| + | These are the first versions of the boards and do not support the auto upgrading firmware to match the SCM version. The latest firmware is 20.10.816 for these boards. | ||
| + | |||
| + | Wireline 20.10.816 for AT27C010 Chips. This works with the 20.14.048 Conventional Firmware. They will also work in the ST29F010 chips which are programmable. | ||
| + | |||
| + | :: [[Media:wlb_2000_20.10.816_u134_upper_AT27C010.bin|Wireline U134 Upper 20.10.816 ]] | ||
| + | :: [[Media:wlb_2000_20.10.816_u135_lower_AT27C010.bin|Wireline U135 Lower 20.10.816 ]] | ||
| + | |||
| + | |||
| + | === TRN7477F === | ||
| + | |||
| + | 4 wire wireline | ||
| + | |||
| + | Older board, only supports a 128k EEPROM (27c010) | ||
| + | |||
| + | === TRN7667F/TRN7706F === | ||
| + | |||
| + | Older board, 8 wire version of [[#TRN7477F|TRN7477F]] | ||
| + | |||
| + | I've never seen this board. | ||
| + | |||
| + | == Version 2 == | ||
| + | |||
| + | These are the newer boards and the only boards supported in the [[ASTRO-TAC#Wireline notes|ATAC comparator]]. All these support the auto upgrading of firmware to match the SCM version. | ||
| + | |||
| + | In the ATAC the Firmware is on a [[media:AM29F002NBB.pdf|AM29F002NBB]], and this is the only chip that will work for the auto upgrade to work. | ||
| + | |||
| + | The Quantar uses an [[media:AT29C020.pdf|AT29C020]] chip and again this is the only chip supported for auto upgrade to work. | ||
| + | : If you match WL firmware to your SCM you can mix and match chips, but of course auto upgrade is not going to work. | ||
| + | : Of course you can't use a ATAC WL in a Quantar and vice versa with out changing the firmware. Again the boot loader is locked. | ||
| + | |||
| + | === CLN6651D=== | ||
| + | |||
| + | === CLN6955/CLN6957 === | ||
4 Wire Board | 4 Wire Board | ||
| Line 15: | Line 55: | ||
The CLN6957 is the International version and doesn't support connections to the external 50 pin telco connector, only to the screw terminal connector (orange block). | The CLN6957 is the International version and doesn't support connections to the external 50 pin telco connector, only to the screw terminal connector (orange block). | ||
| − | == CLN6956A/CLN6958A/TRN7706G/CLN6883B/CLN7343A == | + | ==== CLN6955 Pictures ==== |
| + | |||
| + | <gallery mode="packed-hover" height=200px widths=200px> | ||
| + | WLB 4 Wire CLN6955A - 00001.JPG | ||
| + | WLB 4 Wire CLN6955A - 00002.JPG | ||
| + | WLB 4 Wire CLN6955A - 00003.JPG | ||
| + | WLB 4 Wire CLN6955A - 00004.JPG | ||
| + | WLB 4 Wire CLN6955A - 00005.JPG | ||
| + | WLB 4 Wire CLN6955A - 00006.JPG | ||
| + | WLB 4 Wire CLN6955A - 00007.JPG | ||
| + | WLB 4 Wire CLN6955A - 00008.JPG | ||
| + | WLB 4 Wire CLN6955A - 00009.JPG | ||
| + | WLB 4 Wire CLN6955A - 00010.JPG | ||
| + | WLB 4 Wire CLN6955A - 00011.JPG | ||
| + | WLB 4 Wire CLN6955A - 00012.JPG | ||
| + | WLB 4 Wire CLN6955A - 00013.JPG | ||
| + | WLB 4 Wire CLN6955A - 00014.JPG | ||
| + | WLB 4 Wire CLN6955A - 00015.JPG | ||
| + | WLB 4 Wire CLN6955A - 00016.JPG | ||
| + | WLB 4 Wire CLN6955A - 00017.JPG | ||
| + | WLB 4 Wire CLN6955A - 00018.JPG | ||
| + | WLB 4 Wire CLN6955A - 00020.JPG | ||
| + | </gallery> | ||
| + | |||
| + | |||
| + | === CLN6956A/CLN6958A/TRN7706G/CLN6883B/CLN7343A === | ||
8 wire boards | 8 wire boards | ||
| − | == | + | ==== CLN7343B Pictures ==== |
| − | + | This was a 8 wire board from an ATAC 9600 converted Quantar Service. | |
| − | 8 wire | ||
| − | == | + | <gallery mode="packed-hover" height=200px widths=200px> |
| + | WLB 8 Wire CLN7343B - 00001.JPG | ||
| + | WLB 8 Wire CLN7343B - 00002.JPG | ||
| + | WLB 8 Wire CLN7343B - 00003.JPG | ||
| + | WLB 8 Wire CLN7343B - 00004.JPG | ||
| + | WLB 8 Wire CLN7343B - 00005.JPG | ||
| + | WLB 8 Wire CLN7343B - 00006.JPG | ||
| + | WLB 8 Wire CLN7343B - 00007.JPG | ||
| + | WLB 8 Wire CLN7343B - 00008.JPG | ||
| + | WLB 8 Wire CLN7343B - 00009.JPG | ||
| + | WLB 8 Wire CLN7343B - 00010.JPG | ||
| + | WLB 8 Wire CLN7343B - 00011.JPG | ||
| + | WLB 8 Wire CLN7343B - 00012.JPG | ||
| + | WLB 8 Wire CLN7343B - 00013.JPG | ||
| + | WLB 8 Wire CLN7343B - 00014.JPG | ||
| + | </gallery> | ||
| − | |||
| − | == | + | === CLN6956D/CLN6958D/CLN7343D === |
| − | + | 8 wire boards, later revision? | |
| − | + | === CLN6959B === | |
| − | + | Wireline and power supply board | |
| − | |||
= Firmware notes = | = Firmware notes = | ||
| − | + | [[File:AM29F002NBB.pdf|thumb|AM29F002NBB DataSheet]] | |
| + | |||
| + | [[File:AT29C020.pdf|thumb|AT29C020 Datasheet]] | ||
Revision as of 01:04, 4 April 2019
The Wireline Boards come in several different models, some at 8 wire with 4 audio ports and 2 v.24/modem ports and others are 4wire. The 8wire boards support more IO physically than the 4 wire, but other than that are not really interesting in Quantar service.
In ATAC service the 8wire boards are standard as they support 2 v.24 or analog channels per board.
Boards
Pre-Versions
No idea about these parts. Analog only maybe?
TTN5041A
TTN5061E
Version 1
These are the first versions of the boards and do not support the auto upgrading firmware to match the SCM version. The latest firmware is 20.10.816 for these boards.
Wireline 20.10.816 for AT27C010 Chips. This works with the 20.14.048 Conventional Firmware. They will also work in the ST29F010 chips which are programmable.
TRN7477F
4 wire wireline
Older board, only supports a 128k EEPROM (27c010)
TRN7667F/TRN7706F
Older board, 8 wire version of TRN7477F
I've never seen this board.
Version 2
These are the newer boards and the only boards supported in the ATAC comparator. All these support the auto upgrading of firmware to match the SCM version.
In the ATAC the Firmware is on a AM29F002NBB, and this is the only chip that will work for the auto upgrade to work.
The Quantar uses an AT29C020 chip and again this is the only chip supported for auto upgrade to work.
- If you match WL firmware to your SCM you can mix and match chips, but of course auto upgrade is not going to work.
- Of course you can't use a ATAC WL in a Quantar and vice versa with out changing the firmware. Again the boot loader is locked.
CLN6651D
CLN6955/CLN6957
4 Wire Board
The CLN6957 is the International version and doesn't support connections to the external 50 pin telco connector, only to the screw terminal connector (orange block).
CLN6955 Pictures
CLN6956A/CLN6958A/TRN7706G/CLN6883B/CLN7343A
8 wire boards
CLN7343B Pictures
This was a 8 wire board from an ATAC 9600 converted Quantar Service.
CLN6956D/CLN6958D/CLN7343D
8 wire boards, later revision?
CLN6959B
Wireline and power supply board
