Difference between revisions of "IMACS/800"
Jump to navigation
Jump to search
(Created page with "IMACS/800 Channel Bank or TeNSEr How eeprom has little endian format srec_cat -Output 3.44\ U18\ ST\ M27C4002-byteswap.bin -Binary "3.44 U18 ST M27C4002.bin" -Binary --by...") |
|||
| Line 5: | Line 5: | ||
srec_cat -Output 3.44\ U18\ ST\ M27C4002-byteswap.bin -Binary "3.44 U18 ST M27C4002.bin" -Binary --byte-swap | srec_cat -Output 3.44\ U18\ ST\ M27C4002-byteswap.bin -Binary "3.44 U18 ST M27C4002.bin" -Binary --byte-swap | ||
srec_cat -Output 3.44\ U17\ ST\ M27C4002-byteswap.bin -Binary "3.44 U17 ST M27C4002.bin" -Binary --byte-swap | srec_cat -Output 3.44\ U17\ ST\ M27C4002-byteswap.bin -Binary "3.44 U17 ST M27C4002.bin" -Binary --byte-swap | ||
| + | |||
| + | Superuser password is "Superuser" | ||
| + | From the main screen you can go into "sYs" and then "Reg" to reset the system. | ||
| + | |||
| + | Vendor codes | ||
| + | 101 - IMACS | ||
Revision as of 09:56, 28 September 2021
IMACS/800 Channel Bank or TeNSEr
How eeprom has little endian format srec_cat -Output 3.44\ U18\ ST\ M27C4002-byteswap.bin -Binary "3.44 U18 ST M27C4002.bin" -Binary --byte-swap srec_cat -Output 3.44\ U17\ ST\ M27C4002-byteswap.bin -Binary "3.44 U17 ST M27C4002.bin" -Binary --byte-swap
Superuser password is "Superuser" From the main screen you can go into "sYs" and then "Reg" to reset the system.
Vendor codes
101 - IMACS
