Difference between revisions of "UHF Receiver"
Jump to navigation
Jump to search
(Created page with "This page covers the Range 1 to Range 4 receivers. The Range 0 is a newer (and easier to modify) design. = Basics = The basic receiver is pictured below. Note the UHF R1-...") |
|||
| Line 4: | Line 4: | ||
The basic receiver is pictured below. Note the UHF R1-R4 receivers have a preselector that's flush with the front panel and only 3 adjustment. This is a dead give away that you have a UHF R1-R4 from the front. Unfortunately there is not an easy way to identify it further than by part number. | The basic receiver is pictured below. Note the UHF R1-R4 receivers have a preselector that's flush with the front panel and only 3 adjustment. This is a dead give away that you have a UHF R1-R4 from the front. Unfortunately there is not an easy way to identify it further than by part number. | ||
| + | |||
| + | <gallery heights="200px" widths="200px" mode="packed"> | ||
| + | 1128152130.jpg|UHF RX Front | ||
| + | 1128152131.jpg|UHF RX Back | ||
| + | 1128152130a.jpg|UHF RX Case | ||
| + | 1128152132.jpg|UHF RX Internal | ||
| + | </gallery> | ||
| + | |||
| + | |||
| + | |||
| + | |||
| + | [[File:UHF Receiver Models TRE6281-TRE6282-TRE6283-TRE6284.pdf|thumb|UHF Receiver Models TRE6281-TRE6282-TRE6283-TRE6284 Service Manual Excerpt]] | ||
| + | |||
| + | [[File:UHF Receiver Models TRE6281-TRE6282-TRE6283-TRE6284-1.png|thumb|UHF Receiver Models TRE6281-TRE6282-TRE6283-TRE6284 Schematic Sheet 1 of 4]] | ||
| + | [[File:UHF Receiver Models TRE6281-TRE6282-TRE6283-TRE6284-2.png|thumb|UHF Receiver Models TRE6281-TRE6282-TRE6283-TRE6284 Schematic Sheet 2 of 4]] | ||
| + | [[File:UHF Receiver Models TRE6281-TRE6282-TRE6283-TRE6284-3.png|thumb|UHF Receiver Models TRE6281-TRE6282-TRE6283-TRE6284 Schematic Sheet 3 of 4]] | ||
| + | [[File:UHF Receiver Models TRE6281-TRE6282-TRE6283-TRE6284-4.png|thumb|UHF Receiver Models TRE6281-TRE6282-TRE6283-TRE6284 Schematic Sheet 4 of 4]] | ||
Revision as of 22:12, 28 November 2015
This page covers the Range 1 to Range 4 receivers. The Range 0 is a newer (and easier to modify) design.
Basics
The basic receiver is pictured below. Note the UHF R1-R4 receivers have a preselector that's flush with the front panel and only 3 adjustment. This is a dead give away that you have a UHF R1-R4 from the front. Unfortunately there is not an easy way to identify it further than by part number.
UHF RX Front
UHF RX Back
UHF RX Case
UHF RX Internal
