View source for Dave NX4Y v.24 Board

[[Category:V.24]]
Dave Krauss, NX4Y <ref>https://files.tapr.org/meetings/DCC_2016/DCC2016-P25Network.pdf</ref> made a v.24 board circa 2017 which was the minimum viable product of a v.24 board.   This was amazing in it's simplicity, only 3 parts and one IC.  

It worked well to interconnect the quantar to a Cisco DEC interface, but had no provisions for internal clocking or any ESD protection.  Bypass caps were absent and there was no RF protection on it.  They worked well in the Quantar, but the RJ-45 connector was placed improperly to sit without a great deal of cant on the 8 wire/astrotac wireline board. 


<gallery mode=packed widths=300px heights=300px>
nx4y v.24 board front.jpg
nx4y v.24 board back.jpg
nx4y v.24 board fit issue.jpg
nx4y v.24 board fit issue canted all in side.jpg
nx4y v.24 board fit issue canted all in.jpg
nx4y v.24 board fit issue canted.jpg
</gallery>



This design provided the impetus for me to design [[V.24 Level Shifter Board|my board]]