Quantro/Quantar-Backplane

From W9CR
Revision as of 00:09, 23 September 2017 by Bryan (talk | contribs)
Jump to navigation Jump to search

Backplanes

This handles all the interconnect to the units modules and additionally in the Quantro discrete interconnects to the IPA which are behind the PA.

The Telco 50 pin is used for interfacing most of the Wireline and IO, I typically use a punch down block for this, as it provides an easy way to test and a clean looking hookup.

Quantar

Quantar Backplane TRN7480A Service Manual Excerpt

Quantro

Note the Quantro has two connecotrs on the front station side of the board which are typically used by the PA interconnects, you have to reach in and connected these from the back of the unit next to the IPA module.

Quantro Backplane TRN7688A Service Manual Excerpt

Astro Tac

Astro-Tac BackPlane TRN7737A Service Manual excerpt