IMACS/800

From W9CR

Revision as of 10:56, 28 September 2021 by Bryan (talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Jump to navigation Jump to search

IMACS/800 Channel Bank or TeNSEr

How eeprom has little endian format
srec_cat -Output 3.44\ U18\ ST\ M27C4002-byteswap.bin -Binary "3.44 U18 ST M27C4002.bin" -Binary --byte-swap
srec_cat -Output 3.44\ U17\ ST\ M27C4002-byteswap.bin -Binary "3.44 U17 ST M27C4002.bin" -Binary --byte-swap

Superuser password is "Superuser" From the main screen you can go into "sYs" and then "Reg" to reset the system.

Vendor codes

101 - IMACS

Retrieved from "https://wiki.w9cr.net/index.php?title=IMACS/800&oldid=6411"